Correct driving operation is fundamental to protecting drive system components and can effectively reduce abnormal wear.
Starting and Gear Operation
Before starting the vehicle, ensure that the gear is in "P" (Park) or "N" (Neutral) and the handbrake is engaged. When using the one-button start function, press the brake pedal. After starting, it is recommended to let the engine warm up appropriately to reach normal operating temperature.
Manual Transmission Vehicles: When shifting gears, depress the clutch pedal quickly and fully, select the gear reasonably according to vehicle speed and engine speed (usually between 2000-3000 RPM), and avoid high gear at low speed or low gear at high speed.
Automatic Transmission Vehicles: Choose the appropriate driving mode (e.g., D mode, S mode) according to road conditions (such as flat road or slope). When parking, make sure the vehicle comes to a complete stop before shifting into "P" and engaging the handbrake.
Brake System Operation
Reasonable use of the brake system directly affects safety and component lifespan.
When braking, anticipate road conditions in advance, and try to brake lightly and gradually, avoiding sudden braking that can cause impact to the vehicle and passengers.
On long downhill sections, actively use engine braking-by manually downshifting (manual transmission) or switching to a lower gear (automatic transmission) to control speed using engine resistance, reducing the frequency of brake use and preventing brake pad overheating, which could lead to performance degradation or failure.
Steering and Tires
Hands should hold the steering wheel steadily at the 3 o'clock and 9 o'clock positions, especially at high speeds, without excessive turning angles.
Tires are the components that directly contact the road from the drive system and need regular checks for tire pressure and tread depth, ensuring they are within the specified range to maintain grip, handling, and reduce the risk of abnormal wear.
